I bought the engine used on Ebay from Ron in Virgina.
It was used for about 300 hours in a Zenith 601 before the owner pulled it to
install a slightly larger Jabiru engine.
It was shipped in a very sturdy crate by truck and I picked it up at the
trucking terminal.
I plan to install new bearings and cylinders on the engine. I also need to
switch from the top mount starter to a bottom mount Diehl case. The intake
will be changed, but I should be able to use the carb that came on the engine.
I will also attempt to reuse the 2-1 exhaust pipes.
It was used for about 300 hours in a Zenith 601 before the owner pulled it to
install a slightly larger Jabiru engine.
It was shipped in a very sturdy crate by truck and I picked it up at the
trucking terminal.
I plan to install new bearings and cylinders on the engine. I also need to
switch from the top mount starter to a bottom mount Diehl case. The intake
will be changed, but I should be able to use the carb that came on the engine.
I will also attempt to reuse the 2-1 exhaust pipes.
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |